Transformer Repair Technician

Job Title: Transformer Repair Technician

Department: Repair

Work Location: Florida Overhead (Panama City, FL)

Reports To: Transformer Repair Lead / Customer Service Warranty/Repair Manager

FLSA Status: Non-Exempt

Compensation: $23 - $27 per hour

Shift: 1st - Monday - Thursday 6:30 am - 5:00 pm

Please Note: Due to current production demands, this position currently requires mandatory overtime, including Friday and Saturday shifts. This schedule is expected to continue through the end of the year but is subject to change based on business needs.

About CMI: Central Moloney has been a trailblazer in manufacturing distribution transformers and transformer components since 1949. Our ISO 9001-certified legacy is built on delivering top-notch products, on-time reliability, and pushing the boundaries of excellence. Join us in powering a future resonating with Central Moloney's strength.

Position Summary: The Transformer Repair Technician troubleshoots, repairs, and retests overhead distribution transformers that are rejected during production, fail final test, or are returned by customers. Working on the production floor under the direction of the Repair Lead, this position disassembles and rebuilds units, replaces defective components, verifies repairs through electrical testing, and documents all work so units are released safely, on time, and in accordance with quality standards. The Repair Technician also helps identify recurring defects and shares findings with Production, Quality, and Engineering to prevent repeat issues.

Responsibilities

• Troubleshoot and repair nonconforming and returned units, including Orange Tag, Yellow Tag production rejects, Purple Tag post-production rejects, customer return/warranty units, following the priorities set by the Repair Lead.
• Inspect units to identify the cause of failure, including electrical faults, insulation damage, oil leaks, and mechanical or cosmetic defects.
• Disassemble and rebuild units as needed, including draining and handling insulating oil, untanking and re-tanking core and coil assemblies, and resealing covers and gaskets.
• Remove and replace components such as bushings, tap changers, leads, connectors, arresters, fuses, and gaskets, using brazing, crimping, and hand and power tools per work instructions.
• Perform required electrical testing to verify repairs, including ratio (TTR), polarity, winding resistance, and insulation resistance (Megger), and coordinate final testing with the Test department prior to release.
• Perform leak checks, refill units with oil to the correct level, and complete paint touch-up and final cosmetic inspection.
• Read and interpret work instructions, drawings, nameplates, wiring diagrams, and specifications to complete repairs accurately.
• Document repair findings, actions taken, and test results in the appropriate tracking system, and accurately update unit tags and status.
• Communicate recurring defects and root-cause observations to the Quality Supervisor or Manager.
• Safely operate overhead cranes, hoists, forklifts, and other material handling equipment to move units and components.
• Follow all company safety requirements, including lockout/tagout (LOTO), electrical test-area safety, PPE, oil spill and environmental procedures.
• Maintain tools, test equipment, and work areas in clean, organized, and safe condition.
• Participate in continuous improvement efforts to reduce rework, improve turnaround time, and control costs.
• Perform other duties as assigned to support department and company objectives.

Requirements

Experience / Qualifications

• 1 + Year previous experience in manufacturing, machine operation, mechanical repair, industrial maintenance, electrical work, or a related hands-on technical environment preferred.
• Transformer manufacturing experience, including coil winding, coil leafing, transformer assembly, testing, or repair, strongly preferred.
• Experience troubleshooting mechanical and/or electrical issues and identifying potential causes of equipment or component failure preferred.
• Experience using hand and power tools for disassembly, repair, component replacement, and reassembly.
• Ability to read and follow work instructions, drawings, wiring diagrams, specifications, and other technical documentation.
• Electrical testing experience, including use of meters or transformer testing equipment, is a plus.
• Brazing, crimping, or electrical connection experience is a plus.
• Experience operating overhead cranes, hoists, forklifts, or similar material-handling equipment is a plus.
• Experience working within established safety procedures, including LOTO and electrical safety practices, preferred.
• Ability to accurately document repair findings, completed work, and test results.
• Strong mechanical aptitude, troubleshooting ability, and attention to detail.

Physical Demands

• Ability to stand and walk for extended periods throughout the workday.
• Frequently required to bend, stoop, crouch, kneel, climb, reach, grasp, and use hands to handle tools, equipment, and materials.
• Ability to lift and/or move up to 50 pounds unassisted.
• Manual dexterity necessary to safely operate tools and perform transformer repair activities.
• Visual ability including close, distance, color, peripheral, and depth perception necessary to inspect, troubleshoot, and repair transformer components.

Working Conditions

• Work is performed primarily in a manufacturing environment.
• Regular exposure to loud noise, temperature variations, moving equipment, overhead lifts, and other conditions typical of an industrial facility.
• Regular contact with insulating oil, paint, and other materials handled per safety and environmental procedures.
• Work may be performed near energized test equipment; required to follow all electrical safety and test-area procedures.
• Required to follow all established safety procedures and identify or report potential workplace hazards.
• Required to wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and safety-toe footwear as applicable.

Benefits

• Starting Pay of $23 - $27 per hour
• Medical, dental, and vision insurance
• 401(k) with company match
• Paid time off and holidays

Fine Print / Legal Disclaimer:

Please note & Review the following: This job is considered safety-sensitive because impairment by drugs or alcohol may constitute a threat to health or safety, and/or a lapse of attention could result in injury, illness, or death.

Central Moloney is a tobacco-free facility. The use of tobacco products (including cigarettes, cigars, smokeless tobacco, and e-cigarettes/vapes) is not permitted on company property.

Equal Opportunity Employer Statement: Central Moloney is an equal opportunity employer. We make employment decisions based on qualifications, merit, and business needs. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital or family status, genetic information, veteran status, or any other status protected by law. We are committed to creating a respectful, fair, and welcoming workplace for all, and we believe that a variety of experiences and perspectives strengthens our team.

Recruitment Policy: No Third-Party Involvement We value the interest of all job seekers; however, we do not accept unsolicited resumes or candidate submissions from recruitment agencies, staffing firms, or third-party recruiters. Any resumes submitted in the absence of a signed agreement with Central Moloney will be considered the property of CMI. Central Moloney will not be responsible for any fees related to unsolicited resumes.